Calendar

August 2016
SunMonTueWedThuFriSat
 << < > >>
 123456
78910111213
14151617181920
21222324252627
28293031   

Announce

Who's Online?

Member: 0
Visitor: 1

rss Syndication

Archives

31 Dec 2015 
It is very exciting getting into the art of woodworking. However, with it being such a large field, many people can feel a little uneasy trying to start out. Don't let this happen to you. Instead, embrace the following tips, and get started today putting your skills to work with some wood.

Woodworking can be a fun, and satisfying, hobby. However, it is very important to play it safe when working with tools, substances that cause fumes and other common dangers of the craft. Be sure to wear safety glasses, allow plenty of fresh air for ventilation when using oil-based products and always read the directions before you start anything!

Make sure your work area is safe, well-lit and organized. Working with woods is difficult work, and it is dangerous work when your work area is dim and there are safety hazards in the area. Make sure there are no spills, tripping hazards and other safety hazards that are a disaster waiting to happen.

Keep a ruler inside your pocket, and make sure it stays put. Try switching to a metal ruler, keeping it in a pocket with your telescoping magnet, the kind used to reach and pick up screws or nails. The magnet will ensure that the ruler won't fall out.

Become more accurate by using a drafting square. If you need an accurate square that's about 2" to 3", you have limited options. Drywall squares tend to be very inaccurate. With carpenter squares, you have to hook them onto your work piece's edge. A drafting square can be easily used if you happen to have one lying around. If you don't, they are pretty cheap to find at art stores. work shed kits are incredibly accurate and as useful as a tape measure.

If you are going to be doing a big woodworking project on the outside of your home, check to make sure it is within the rules. Your local government may have zoning regulations or even a permit process needed for structures like garages, decks and even storage sheds. Also check with your neighborhood association if there is one.

If you will be re-coating an existing finish, be sure that the surface is clean and free of any wax or oils. Then, let it dry completely, and lightly scuff the surface with a 220-grit sandpaper so that the finish you are applying will have something to hold onto.

Is there a screw that's hard to reach, and you can't get that screwdriver in? Your toolbox may hold the answer! Get screwdriver with work shed plans that comes with a twelve point socket. Place the socket on your screwdriver, then use it on the ratchet.

Look around online, at garage sales, estate sales and yard sales for deal on your tools and other woodworking equipment. You can find some high-quality used stuff. Your wallet will be happy if you shop around a little bit.

When wiping excess stain off wood, wipe in the direction of the grain. Otherwise, the stain will just lay on top. Not only does this ensure that the stain is getting all the way into the grain, it will show off the grain of the wood to its best advantage.

Take baby steps when first starting out with woodworking. It's a lot of fun to learn, but woodworking is also pretty dangerous if you get too cocky too soon. Even when you feel like you know the basics, keep practicing them. And always where safety gear. You are much better off.

Watch other woodworkers for tips. You might find that, after watching someone work on wood, that they do things a little differently than you do them. In fact, noticing differences might just help you to be a more effective woodworker yourself. Make sure you get permission first, though; you don't want them to think you are staring too much!

Use your woodworking talents to create a great yard area. You can build things like a beautiful deck, and a place to feed birds. Birds are great because they help to get rid of many of the annoying pests that bother you when relaxing outside. If you are a professional woodworker, then invite potential clients to come see some of your past work, firsthand.

Never allow someone to watch while you are woodworking without wearing the same gear that you are wearing. Being anywhere near the tools is a hazard, even if they are not using them. Wood or parts of the tool could fly into the air and strike them just as they could you.

Just one extension cord is always safer that a tangle of cords linked together. Unplug one tool and plug in another when you need to use it. This simple safety tip can prevent electrocution and tripping hazards.

When you have to make adjustments to your woodworking power tools or change saw blades on your power saws, be sure to unplug your tool. Do not simply trust the on/off switch to keep you safe. If the switch is activated while you are adjusting your power tool, you could be seriously injured or even killed.

No woodworking shop is complete without a variety of levels. A four foot level is more accurate than shorter levels on longer pieces of wood. Opt for a bubble type level for more accurate results than the newer digital levels. For smaller projects opt for one foot bubble levels.

If you plan to use a new wood, practice with it before you get started on a project. All woods feel different on a saw, when you drill or even when you hammer into them. Practice with all the tools you plan to use so you don't mess up the wood for your actual project.

When your tools have safety features, use them. Whether it is a cap on a saw blade or a safety switch which locks the on button, using them means protecting not only yourself, but anyone else who enters your shop. Newer tools won't work unless these pieces are in place, so be sure to use them.

It is hard to imagine build workshop shed without woodworking. Those that can shape simple wood into imaginative or useful pieces are often sought after. If you hope to be successful with woodworking, or just boost your knowledge, it is hoped that this article has given you proper insight into enjoying working with wood.
Admin · 22750 views · 0 comments
31 Dec 2015 
Congratulations, your blog is created !
To access the different options of your Blog, click on Connection : Connect yourself with the username : Admin and your password (the one you chose at the blog creation).
Once you're connected, a toolbar will be placed automatically at the top of the page, managing you to access the administration panel.

(This text is an example of an article, you can delete it as soon as you wish)
Admin · 3 views · 1 comment
Categories: First category